Honeywell Series 3: Plug-In Doorbell with Strobe Light and Push Button (RDWL313P) 설치 가이드
5
Secret Knock
You can set up a Secret Knock that makes a different ring and light setting for
each push button. The Secret Knock is triggered by pressing the push button
quickly 3 times.
each push button. The Secret Knock is triggered by pressing the push button
quickly 3 times.
1. Press the push button 3 times quickly.
2. Within 12 seconds of pressing the push button, press the Music button to
select the ring for the Secret Knock
3. Within 12 seconds of pressing the push button, press the Sunlight button
to select a light setting for the Secret Knock.
Maintenance
Your doorbell and push button require no maintenance except to periodically
change the battery.
change the battery.
If using the correct battery, its life should be approximately:
• Up to 2 years for the push button; replace with
• Up to 2 years for the push button; replace with
CR2032 lithium battery
Low Battery Notification
When the push button batteries are low, two beep sounds are heard after the
normal tune.
normal tune.
Reset
This process removes all pairings, including the push button that came with
this doorbell:
1. Unplug the doorbell.
this doorbell:
1. Unplug the doorbell.
2. Press and hold the Setting button, and plug the doorbell back in at the
same time.
3. The doorbell will beep several times rapidly, and is returned to its factory
default settings.