Zanussi ZDI26010XA 사용자 설명서

The function comes into operation:

• 5 minutes after the completion of the programme.

• After 5 minutes if the programme has not started.

1. Keep the appliance door ajar.

2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme

selection mode.

3. Press one of the programme buttons until the display shows the number of the programme you want to

set.

• The display shows the programme duration after some seconds.

4. Set the applicable options.

5. Close the appliance door to start the programme.

Activate or deactivate the Multitab option before the start of the programme. Activate Multitab option only

when you use the combi detergent tablets. This option deactivates the release of salt. The salt indicator

does not come on. The programme duration can increase.

This option in not applicable to Rinse and Hold and 

 .

max.

1. Press Delay until the display shows the delay time you want to set.

2. Close the appliance door, the countdown starts. The Delay indicator comes on. The countdown starts

to decrease with steps of 1 hour.

When the countdown is completed the programme starts.