Zanussi ZOB343X 사용자 설명서

• If you have nonstick accessories, do not

clean them using aggressive agents, sharp-

edged objects or a dishwasher. It can cause

damage to the nonstick coating.

Clean the oven door with a wet

sponge only. Dry it with a soft cloth.

Do not use steel wool, acids or

abrasive materials as they can

damage the oven surface. Clean the

oven control panel with the same

precautions.

• Regularly do a check of the door gasket. The

door gasket is around the frame of the oven

cavity. Do not use the appliance if the door

gasket is damaged. Contact an Authorised

Service Centre.

• To clean the door gasket, refer to the

general information about cleaning.

The oven door has two glass panels. You can

remove the oven door and the internal glass

panel to clean it.

The oven door can close if you try to

remove the internal glass panel

before you remove the oven door.

Do not use the appliance without the

internal glass panel.

Open the door fully

and hold the two

door hinges.

Lift and turn the

levers on the two

hinges.

Close the oven door

halfway to the first

opening position.

Then pull forward and

remove the door from

its seat.

Put the door on a soft

cloth on a stable

surface.

Release the locking

system to remove the

internal glass panel.

90°

Turn the two

fasteners by 90° and

remove them from

their seats.

2

1

First lift carefully and

then remove the

glass panel.

Clean the glass panel with water and soap. Dry

the glass panel carefully.
When the cleaning is completed, install the

glass panel and the oven door. Do the above

steps in the opposite sequence.
The screen-printing zone must face the inner

side of the door. Make sure that after the

installation the surface of the glass panel frame

on the screen-printing zones is not rough when

you touch it.
Make sure that you install the internal glass

panel in the seats correctly.