Zanussi ZOB343X 사용자 설명서

You can use the functions Duration

 and End 

 at the same time to

set the time for how long the

appliance should operate and when

the appliance should deactivate.

This lets you activate the appliance

with a delay in time. First set the
Duration 

 and then the End 

.

For Duration 

 and End 

, set an oven

function and temperature of cooking. This is not
necessary for the Minute Minder  .

1. Press   again and again until the indicator

for the necessary clock function starts to

flash.

2. Press   or   to set the time for the

necessary clock function.

The clock function operates. The display shows

the indicator for the clock function you set.

For the Minute Minder function the

display shows the time left.

3. When the time ends the indicator of the

clock function flashes and an acoustic

signal sounds. Press a button to stop the

signal.

4. Turn the knob for the oven functions and

the knob for the temperature to the off

position.

With the Duration 

 and End 

functions, the appliance deactivates

automatically.

1. Press the   again and again until the

necessary function indicator flashes.

2. Press and hold  .

The clock function goes out after some

seconds.

Refer to Safety chapters.

Wire shelf:
Push the shelf between the guide bars of the

shelf support and make sure that the feet point

down.

Deep pan:
Push the deep pan between the guide bars of

the shelf support.

All accessories have small

indentations at the top of the right

and left side to increase safety. The

indentations are also anti-tip

devices.

The high rim around the shelf is a

device which prevents cookware

from slipping.

Be careful when you remove the

accessories from a hot appliance.

There is a risk of burns.

You can use the trivet to roast larger pieces of

meat or poultry on one shelf position.