Zanussi ZCG63330BA 사용자 설명서

The Rapid injector is used as a pressure test

point.
1. Connect the pressure gauge to the Rapid

injector.

2. Examine the supply pressure by turning the

Rapid burner and one other burner fully on,

and lighting them. The pressure must be:

a) 20 mbar for Natural Gas

b) 29 mbar for LPG, butane only

c) 37 mbar for LPG, propane only.

3. Turn the taps off and disconnect the

pressure gauge.

4. Make sure that all burners work correctly.

1. Lift the lid.

2. Put on the burner crowns and caps. Make

sure that they are correctly seated.

3. Put on the pan supports.

4. Light one of the hob burners. 

To light the hob burner refer to the "Ignition

of the hob burners".

Check each of the burners.

5. Turn the knob for the hob to the off position.

1. Put in the deep pan and the trivet.

2. Light the oven burner. 

To light the oven burner refer to the "Ignition

of the oven burners".

Check each of the burners.

3. Turn the knob to the off position.

1. Lift the lid.

2. Light one of the hob burners. 

To light the hob burner refer to the "Ignition

of the hob burners".

3. Close the lid. There should be no gas

supply to the hob burners. The burner goes

out.

4. Turn the knob to the off position and lift the

lid. The gas supply should be restored to

the hob burners, when you turn the knob on.

The manufacturer is not responsible

if you do not follow the safety

precautions from Safety chapters.

This appliance is supplied with a main plug and

a main cable.

The spark generator is active all the

time if the phases are not connected

correctly.

Recycle the materials with the symbol  . Put

the packaging in applicable containers to

recycle it. Help protect the environment and

human health and to recycle waste of electrical

and electronic appliances. Do not dispose
appliances marked with the symbol   with the

household waste. Return the product to your

local recycling facility or contact your municipal

office.

*