Zanussi ZDM17301WA 사용자 설명서

The water softener
The water softener removes minerals from the

water supply, which would have a detrimental effect

on the washing results and on the appliance.
The higher the content of these minerals, the harder

your water is. Water hardness is measured in

equivalent scales.
The water softener should be adjusted according to

the hardness of the water in your area. Your local

water authority can advise you on the hardness of

the water in your area. It is important to set the right

level of the water softener to assure good washing

results.

To change the water softener setting:
1. Close the appliance door.

2. Press on/off button

3. Press Start / Pause immediately and keep it

pressed for 6 seconds.

4. Display shows current water softener level.

5. Press Start / Pause immediately to choose the

desired level.

6. The level is remembered after 6 seconds.

0 - 5

0.0 - 0.9

H1

6 - 11

1.0 - 2.0

H2

12 - 17

2.1 - 3.0

H3

18 - 22

3.1 - 4.0

H4

23 - 34

4.1 - 6.1

H5

35 - 45

6.2 - 8.0

H6

1) Factory setting.

CAUTION! Use only detergents for

dishwashers.

To help the environment, do not use

more than the recommended quantity

of detergent given by the detergent

manufacturer.

Refill the detergent dispenser before

each wash cycle.

Filling the detergent dispenser
1. Press the release button (A) to open the lid (B)

of the detergent dispenser.

2. Put the detergent (approximately 15 g) in the

compartment (C). The compartment has 2

parts (D) and (E) that refer to different

quantities of detergent (15 g and 25 g). Put

detergent tablets in part (E) of the

compartment.