Zanussi ZDF26011WA 사용자 설명서

DEACTIVATING THE RINSE AID EMPTY NOTIFICATION

While the appliance is in user mode:
1. Press

• The indicators

and are off.

• The indicator

continues to flash.

• The display shows the current setting:

–

= rinse aid empty notification activated.

–

= rinse aid empty notification deactivated.

2. Press

to change the setting.

3. Press on/off button to confirm the setting.

When rinse aid chamber is empty, the rinse aid indicator is turned on notifying to refill rinse

aid. If you are using multitabs containing rinse aid and you are satisfied with the drying result,

you can deactivate the notification for refilling rinse aid. However, we recommend that you

always use rinse aid for best drying performance.

If you use standard detergent or multitablets without rinse aid, activate the notification to keep

the rinse aid refill indicator active.

BEFORE FIRST USE

1. Make sure that the current level of the

water softener agrees with the hardness

of the water supply. If not, adjust the level

of the water softener. Contact your local

water authority to know the water

hardness in your area.

2. Fill the salt container with special salt for

dishwasher.

3. Fill the rinse aid dispenser with special rinse

aid for dishwasher.

4. Open the water tap.

5. Start a programme to remove any processing

residuals that can still be inside the appliance.

Do not use detergent and do not load the

baskets.

ADDING SALT

Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after

you fill the salt container, start a programme.