Husqvarna 143 R II (9666572-02 + 9673317-01) 사용자 설명서
ASSEMBLY
68 – English
•
To dismantle, follow the instructions in the reverse
order.
order.
Fitting the transport guard
•
Insert the blade in the transport guard (A).
•
Snap the two fasteners (B) into the slots (C) to secure
the transport guard.
the transport guard.
2-teeth blade
•
Insert the blade in the transport guard.
Adjusting the harness and brush
cutter
cutter
Quick release
At the front is an easily accessible, quick release. Use this
if the engine catches fire or in any other emergency
if the engine catches fire or in any other emergency
situation that requires you to free yourself from the
machine and harness.
machine and harness.
Spreading the load on your shoulders
A well-adjusted harness and machine makes work much
easier. Adjust the harness for the best working position.
Tension the side straps so that the weight is evenly
distributed across both shoulders.
easier. Adjust the harness for the best working position.
Tension the side straps so that the weight is evenly
distributed across both shoulders.
Correct height
Adjust the shoulder strap so that the cutting attachment is
parallel to the ground.
parallel to the ground.
Correct balance
Let the cutting attachment rest lightly on the ground.
Adjust the position of the suspension ring to balance the
brush cutter correctly.
Adjust the position of the suspension ring to balance the
brush cutter correctly.
!
WARNING! When using a brush cutter it
must always be hooked securely to the
harness. Otherwise you will be unable to
control the brush cutter safely and this
can result in injury to yourself or others.
Never use a harness with a defective
quick release.
H1153399-45,143RII.fm Page 68 Tuesday, April 15, 2014 7:58 AM