Cisco Cisco UCS B460 M4 Blade Server 데이터 시트
Cisco UCS Mini Blade Server Chassis
18
CONFIGURING the CHASSIS
Caveats
■
You should order enough SFPs, QSFPs, and cables to accommodate your maximum forseeable
needs.
needs.
■
If you selected a QSFP transceiver, make sure you choose a QSFP port license.
■
For the 6324, observe the following:
— The maximum number of SFP+ transceivers, SFP optical transceivers, copper
transceivers, or twinax cables must be less than or equal to four. A minimum of one
of these must be installed for the 6324 to have network connectivity.
of these must be installed for the 6324 to have network connectivity.
— The maximum number of Fibre Channel SFPs must be less than or equal to three.
The reason for this is that at least one SFP+ port on the 6324 must be free so the
6324 can connect to a network.
6324 can connect to a network.
■
The QSFP port can only be used for connection to a secondary chassis, C-series servers, and
storage devices. It cannot be used as an uplink.
storage devices. It cannot be used as an uplink.