Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

CSCee18627, CSCee14096—If the access point is not configured as a local authenticator, the access 
point no longer reboots when you enter the clear radius local-server user user command.

CSCee22037—When you convert an access point from VxWorks to Cisco IOS software and you 
have SNMP traps enabled before the conversion, the access point GUI now indicates as enabled only 
the SNMP traps that are enabled after the conversion.

CSCee44666—Software upgrade no longer disables TACACS+.

CSCee53647—Cisco legacy world mode remains enabled when you upgrade to Cisco IOS release 
12.2(15)XR.

CSCee55955—Client devices no longer fail LEAP authentication when IOS/PIX attributes are 
configured in Cisco Secure ACS.

CSCee62247—Client devices in power-save mode no longer generate tracebacks when associated 
to 350 series access points.

CSCee70393—The debug dot11 mgmt tally command now shows the incrementing and 
decrementing of association counters on the access point.

CSCin62683—Client devices no longer fail to report a potential rogue access point. 

CSCin74956—Client devices that associate to the access point using an SSID with CKIP+CMIC 
encryption now receive IP addresses from the DHCP server.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, choose Wireless from the menu on the left, and 

click Wireless LAN.

This section lists documents related to Cisco IOS Release 12.2(15)XR and to 1100 and 1200 series 
access points.

For information on obtaining documentation, submitting a service request, and gathering additional 
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and 
revised Cisco technical documentation, at: