Cisco Cisco PVC2300 Business Internet Video Camera - Audio PoE 관리 매뉴얼

Defining Preset Positions for Patrol Sequence

Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide

87

 

You can only use this feature if you have an external PTZ base that supports
Pelco D Protocol.

To define preset positions for the camera patrol sequence, follow these steps:

Click Setup in the toolbar.

Click Applications > RS-485. The Applications > RS-485 window displays.

To enable RS485, check the Enable RS485 check box.

In Preset Position, click Set Preset Position to display the Set Pan/Tilt window.

In the Set Pan/Tilt window, configure the following:

•

Set Home—Set the desired position and then click Set Home to define the 
home position.

•

Preset List—Select the desired preset position and the screen will update 
with the current data for the selected preset. If you don’t need the desired 
preset position, click Remove.

•

Preset Name—Enter a suitable name for the current desired position and 
then click Add button to add to the preset list.

•

Pan Speed—Select the desired speed for camera panning.
Default value is 5.

•

Tilt Speed—Select the desired speed for camera tilting. Default value is 5.

Click Save. You are returned to the Applications > RS-485 window.

Your preset position is listed in the Patrol Sequence. Repeat the steps to define 
additional preset positions, if needed. 

Click Save.