Cisco Cisco TelePresence Video Communication Server Expressway 설치 가이드
Introduction
About This Document
This document describes how to install a Cisco TelePresence Video Communication Server CE1000 appliance into your
video network. It contains information on:
video network. It contains information on:
■
Preparing the installation.
■
Installing the hardware.
■
Performing the initial configuration.
■
Troubleshooting the installation.
The Cisco VCS appliance is based on the UCS C220 M3. For more detailed information on installing this appliance, see
the
the
.
About the Cisco VCS Appliance
This product has entered the end-of-life cycle. See the
for details.
The appliance ships with the Cisco VCS software pre-installed, and you can upgrade the software if necessary.
The appliance supports Cisco VCS version X8.2 or later.
Note:
If you choose to use the copper SFPs, the unit cannot support more than 150 traversal calls. This is the case even
if the option key for extra traversal calls has been installed.
Item
Part
Quantity
Chassis
UCSC-C220-M3L
1
Processor
UCS-CPU-E5-2643 (3.30 GHz / 4 Core - Hyper threaded)
2
RAM
UCS-MR-1X082RY-A (8 GB)
4
Hard Disk
UCS-HDD1TI2F212 (1TB NL SAS Disk LFF)
2
RAID Card
UCS-RAID9271-8I (Generation 3 RAID card)
Note:
the appliance is configured with RAID1 (mirror)
1
NIC
N2XX-AIPCI01 (Intel X520 Dual Port 1/10 Gb SFP+ Adapter)
1
EXP-10GSFP-SR= (10 Gb SR Fiber SFP)
2
EXP-1GSFP-T= (1 Gb Copper SFP)
2
PSU
UCSC-PSU-650 W & Power cable
2
TPM
UCSX-TPM1-001 (Trusted Platform Module)
1
Miscellaneous
UCSC-BBLKD-L (HDD filler panel)
2
UCSC-HS-C220M3 (Heat Sink)
2
UCSC-RAIL1 (Rail Kit)
1
The following components are field replaceable:
■
Hard disks
■
PSUs
2
Cisco Video Communication Server CE1000 Appliance Installation Guide