Cisco Cisco UCS B440 M1 High-Performance Blade Server 문제 해결 가이드
UCS Appliance Port Connectivity and
Troubleshooting
Troubleshooting
Document ID: 116075
Contributed by Dmitri Filenko and Andreas Nikas, Cisco TAC
Engineers.
Apr 29, 2013
Engineers.
Apr 29, 2013
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Background Information
Why Appliance Port VLANs Should be Allowed on Uplinks
Definition of a Unified Storage Port
Appliance Port Port-Channel
When to Use Trunk or Access Mode
Situations to Avoid
Appliance Port Failover
Network Uplink Failure
Appliance Port Troubleshooting
Related Information
Prerequisites
Requirements
Components Used
Conventions
Background Information
Why Appliance Port VLANs Should be Allowed on Uplinks
Definition of a Unified Storage Port
Appliance Port Port-Channel
When to Use Trunk or Access Mode
Situations to Avoid
Appliance Port Failover
Network Uplink Failure
Appliance Port Troubleshooting
Related Information
Introduction
This document is intended to assist Unified Computing Systems (UCS) administrators who configure direct
attached storage on the Cisco UCS platform.
attached storage on the Cisco UCS platform.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to the Cisco Technical Tips Conventions for information on document conventions.