Cisco Cisco Web Security Appliance S670 정보 가이드

Contributed by Jakob Dohrmann and Siddharth Rajpathak, Cisco TAC
Engineers.
Jul 15, 2014

How can I verify what firmware version my disks are running on?

Symptoms:  On the WSA 'diagnostic −> raid' does not work.

Environment: Cisco Web Security Appliance (WSA), all versions of AsyncOS

Use the CLI command 'ipcheck' on the WSA to check your disk firmware. This command should show the
firmware version of the disks used on WSA.

If you see:Disk x: 136GB MAXTOR ATLAS10K5_147SASBP00J496ZJRK (BP00 being key) you must
upgrade your firmware.

If you see a string that contains "BP05," then the disk is already running the patched firmware. No further
action is required.

Updated: Jul 15, 2014

Document ID: 117947