Cisco Cisco TelePresence Video Communication Server Expressway
Pattern type
Regex
Pattern string
Enter .*@example.com
4. Click Add Allow List pattern.
To activate the registration restriction:
1. Go to
Configuration > Registration > Configuration
.
2. Configure the Restriction policy as follows:
Restriction policy
Allow List
3. Click Save.
Task 12: Configuring device authentication policy (optional)
Authentication policy is applied by the VCS at the zone and subzone levels. It controls how the VCS
challenges incoming messages (for provisioning, registration, presence, phone books and calls) from that
zone or subzone and whether those messages are rejected, treated as authenticated, or treated as
unauthenticated within the VCS.
challenges incoming messages (for provisioning, registration, presence, phone books and calls) from that
zone or subzone and whether those messages are rejected, treated as authenticated, or treated as
unauthenticated within the VCS.
Each zone and subzone can set its Authentication policy to either Check credentials, Do not check
credentials, or Treat as authenticated.
credentials, or Treat as authenticated.
n
Registration authentication is controlled by the Default Subzone (or relevant alternative subzone)
configuration.
configuration.
n
Initial provisioning subscription request authentication is controlled by the Default Zone configuration.
n
Call, presence, and phone book request authentication is controlled by the Default Subzone (or relevant
alternative subzone) if the endpoint is registered, or by the Default Zone if the endpoint is not registered.
alternative subzone) if the endpoint is registered, or by the Default Zone if the endpoint is not registered.
By default, zones and subzones are configured as Do not check credentials.
Cisco TelePresence Video Communication Server Basic Configuration (Single VCS Control) Deployment
Guide (X8.5.2)
Guide (X8.5.2)
Page 21 of 30
Optional configuration tasks