Cisco Cisco UCS C210 M1 General-Purpose Rack-Mount Server 기술 매뉴얼

Introduction
 Prerequisites
      Requirements
      Components Used
      Network Diagram
      Conventions
 Background Information
 C−Series Troubleshooting Tips
      Obtaining Showtech Support to TAC
      Display of System Event Log Events
      Display of Sensor Readings
      Display of CIMC Log

Run Debug Firmware Utility (CLI)
Run Diagnostics (CLI)
      Common Troubleshooting Scenarios − Power−On Related
      Common Troubleshooting Scenarios − Host Does not Boot
      Common Troubleshooting Scenarios − BMC
 Verify
 Troubleshoot
 Related Information

The Cisco Integrated Management Controller (CIMC) is the management service for the UCS C−Series
server. CIMC runs within the server.

You can use a web−based GUI or SSH−based CLI to access, configure, administer, and monitor the server.
Almost all tasks can be performed in either interface. The results of tasks performed in one interface are
automatically displayed in another.

This document provides some CIMC troubleshooting tips and common troubleshooting scenarios for UCS
C−Series servers.

Cisco recommends that you:

Have a working knowledge of the Cisco UCS C−Series Server Blade hardware and software
administration.

• 

Be familiar with UCS C−Series Servers Cisco Integrated Management Controller.

• 

Understand the impact and implications of the different commands described in this document.

• 

Be familiar with the UCS components and topology.

•