Cisco Cisco ASA 5515-X Adaptive Security Appliance 문제 해결 가이드

Contributed by Marcos Canales, Magnus Mortensen, and Michael
Robertson, Cisco TAC Engineers.
Jun 13, 2013

Introduction
Prerequisites
     Requirements
     Components Used
Troubleshoot

This document describes the steps required in order to troubleshoot this error message if it is seen when you
attempt to save the configuration on an Adaptive Security Appliance (ASA):

ASA# write memory

Building configuration...

[ERROR] write mem

         Building configuration...

Cryptochecksum: fd8b217c 9c16140e e59864cd 7f5a0e45 

%Error reading system:/running−config 

(Configuration line too long)

Error executing command

[FAILED]

ASA#

There are no specific requirements for this document.

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

When you enter the write memory command on the ASA or click Save in the Adaptive Security Device
Manager, the firewall attempts to write the configuration from memory into permanent storage (compact flash