Cisco Cisco ASA 5512-X Adaptive Security Appliance - No Payload Encryption 설치 가이드
7
Upgrade to ASA 8.4 and ASDM 6.4
MASTER FILES
Upgrading the Software
Step 7
Verify the following items:
•
The ASA image file and/or ASDM image file that you have downloaded are the correct ones.
•
The ASA image file and/or ASDM image file that you want to upload are the correct ones.
•
The correct ASA boot image has been selected.
Step 8
Click Next to start the upgrade installation.
You can then view the status of the upgrade installation as it progresses.
The Results screen appears, which provides additional details, such as the upgrade installation status
(success or failure).
(success or failure).
Step 9
If the upgrade installation succeeded, for the upgrade versions to take effect, check the Save
configuration and reload device now check box to restart the ASA, and restart ASDM.
configuration and reload device now check box to restart the ASA, and restart ASDM.
Step 10
Click Finish to exit the wizard and save the configuration changes that you have made.
Note
To upgrade to the next higher version, if any, you must restart the wizard.
(ASDM) Upgrade Using ASDM 6.0 Through ASDM 6.2
Procedure
Step 1
Back up your existing configuration. For example, choose File > Show Running Configuration in New
Window to open the configuration as an HTML page. You can also use one of the File > Save Running
Configuration options.
Window to open the configuration as an HTML page. You can also use one of the File > Save Running
Configuration options.
Step 2
Choose Tools > Upgrade Software from Cisco.com.
In multiple context mode, access this menu from the System.
The Upgrade Software from Cisco.com Wizard appears.
Step 3
Click Next.
The Authentication screen appears.
Step 4
Enter your Cisco.com username and password, and click Next.
The Image Selection screen appears.
Step 5
Check the Upgrade the ASA version check box and the Upgrade the ASDM version check box to
specify the most current images to which you want to upgrade, and click Next.
specify the most current images to which you want to upgrade, and click Next.
The Selected Images screen appears.
Step 6
Verify that the image file you have selected is the correct one, and then click Next to start the upgrade.
The wizard indicates that the upgrade will take a few minutes. You can then view the status of the
upgrade as it progresses.
upgrade as it progresses.
The Results screen appears. This screen provides additional details, such as whether the upgrade failed
or whether you want to save the configuration and reload the ASA.
or whether you want to save the configuration and reload the ASA.
If you upgraded the ASA version and the upgrade succeeded, an option to save the configuration and
reload the ASA appears.
reload the ASA appears.
Step 7
Click Yes.