Cisco Cisco MeetingPlace IP Gateway 기술 매뉴얼

Similarly, for the IP−Interfaces form, the CLAN and Media Processor (also called the Prowler) must have the
Gateway Address set to the default gateway of the IP segment it is connected to. This should already have
been done and is provided here for informational purpose only.

The CLAN and the MEDPRO circuit boards should already be setup. The only thing you need to add is the
Node−Name and IP address of the Cisco MeetingPlace IP Gateway Server.

The Cisco MeetingPlace IP trunks are configured as ISDN PRI using H.323. This is an example of the
IP−Interfaces form:

Set these parameters:

Group Number: 15 (When establishing the signaling group, assign the next available one.)

•