Cisco Cisco UCS B440 M1 High-Performance Blade Server 설치 가이드
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco UCS B200 Blade Server Installation and
Service Note
Service Note
The UCS B200 blade server (shown in
) is now only available in the M2 version (the M1 version
is no longer sold as of 1/21/2011). The procedures in this document apply to both versions. The Cisco
UCS B200 is a half-width blade with 12 DIMM slots; it supports one adapter. You may install up to eight
UCS B200 Blade Servers to a UCS chassis.
UCS B200 is a half-width blade with 12 DIMM slots; it supports one adapter. You may install up to eight
UCS B200 Blade Servers to a UCS chassis.
Figure 1
Cisco UCS B200 Front Panel
1
Asset tab
1
1.
Each server has a blank plastic tag that pulls out of the front panel, provided so you can add your
own asset tracking label without interfering with the intended air flow.
own asset tracking label without interfering with the intended air flow.
7
Network link status LED
2
Blade ejector handle
8
Blade health LED
3
Ejector captive screw
9
Console connector
4
Hard drive bay 1
10 Reset button access
5
Hard drive bay 2
11 Beaconing LED and button
6
Power button and LED
195354
4
5
1
2
3
6
7
8
9
10
11