Cisco Cisco NSS030 Smart Storage External Power Adapter 릴리즈 노트

4

Release Notes for Cisco NSS300 Series Smart Storage Firmware Version 1.5.0

This procedure describes how to upgrade the firmware on the NSS300 Series 
Smart Storage devices from the Network Attached Storage (NAS) interface.

From the Administration > Firmware Upgrade window, you can view the current 
firmware version and update the firmware on the NAS. The current NAS settings 
will not change while performing the firmware version update.

As a precautionary measure, backup the NAS system configuration settings, 
important data, and system files before upgrading the firmware.

Do not upgrade the firmware over a WAN or Wi-Fi link since an interuption in service 
can lead to corruption of the firmware upgrade process.

To upgrade the firmware:

Click Administration > Firmware Upgrade from the Navigation menu. The 
Firmware Upgrade window opens. The current firmware version is displayed.

Click Browse to locate the correct firmware file for the system update. Before 
updating the system, verify that the product model and firmware version you are 
going to update is correct.

Click Update The System.

Within 15 seconds, a MD5 checksum result window will display to confirm the 
integrity of the system. After the successful integrity check of the NAS, click OK 
for the new firmware file to upload to the NAS. After this has completed, a 
message displays and asks you to reboot the system. Please wait patiently. A 
system log in window will automatically display after the successful update to the 
new firmware.