Cisco Cisco MGX Service Resource Module Enhanced [SRM-E] 백서
Technical Overview
© 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 12 of 3
Total version mismatch : 0
Total Layer4 decisions : 2714
Total Layer4 rejections : 476
Total Layer7 decisions : 1388667
Total Layer7 rejections : 2164
Total Layer4 LB policy misses : 0
Total Layer7 LB policy misses : 0
Total times rserver was unavailable : 22
Total ACL denied : 0
Total Layer4 LB policy misses : 0
Total Layer7 LB policy misses : 0
Total times rserver was unavailable : 22
Total ACL denied : 0
Note: In a steady state system, when no configurations are taking place, if some of these
counters are incrementing continuously it should raise flag.
Device Monitoring
Device Availability
The state of the module can be monitored with the following MIB.
MIB:
ciscoEntityFRUControlMIB
Object:
cefcModuleOperStatus
OID:
1.3.6.1.4.1.9.9.117.1.2.1.1.2
Possible Return Values:
1:unknown
2:ok
3:disabled
14:outOfServiceEnvTemp
15:poweredDown
2:ok
3:disabled
14:outOfServiceEnvTemp
15:poweredDown
Fault Tolerance
The command show ft group detail provides information on the state of each
module.
module.
My State: Displays the state of the local ACE.
Peer State: Displays the state of the remote ACE.
A state of FSM_FT_STATE_ACTIVE lets you know the ACE module is the
Active ACE.
Active ACE.
A state of FSM_FT_STANDBY_HOT lets you know the ACE module is the
Standby ACE, and that the configs are in sync.
Standby ACE, and that the configs are in sync.