Cisco Cisco 5520 Wireless Controller 기술 참조

Cisco Virtual Wireless Controller Deployment Guide, Release 7.5

Deploying Virtual WLC on UCS-E Modules for ISR-G2

Figure 1

Configuration Example for Deploying UCS-E Module for the ISR-G2

Loading ISR-G2 Image

Complete these steps:

Step 1

Load an image on ISR-G2 that supports the UCE-E module. This example uses 15.2(4)M2 on c3900
platform.

Router#show ver

Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(4)M2, RELEASE

SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Compiled Wed 07-Nov-12 17:00 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M8, RELEASE SOFTWARE (fc1)

Router uptime is 46 minutes

System returned to ROM by power-on

System image file is "flash:c3900-universalk9-mz.SPA.152-4.M2.bin"

IP Address, Default Gateway, and Routing Configuration on UCS-E Modules

Step 2

To configure IP address and default gateway on the UCS-E module interface.

interface ucse2/0

ip address 10.0.0.100 255.255.255.0

imc ip address 10.0.0.1 255.255.255.0 default-gateway 10.0.0.100

imc access-port shared-lom console

interface ucse2/1