Cisco Cisco TelePresence Video Communication Server Expressway
Appendix 6 – Individual and group FindMe types
Appendix 6 – Individual and group FindMe
types
types
Every FindMe profile is configured as either Individual or Group.
Individual
Individual mode assumes that the individual can only take a call on one device at a time.
If any device in the current active location is busy, a call to this FindMe ID will be immediately
forwarded to the on-busy devices.
forwarded to the on-busy devices.
If no devices (in the current active location) were busy, after the specified ring duration the call will
route to the on-no-answer devices.
route to the on-no-answer devices.
Group
Group mode assumes that more than one person can take calls to this FindMe.
If any device in the current active location is not busy, the non busy devices will ring. The call will
be immediately forwarded to the on-busy devices if all devices in the current active location are
busy.
be immediately forwarded to the on-busy devices if all devices in the current active location are
busy.
If any device in the current active location is not busy, after the specified ring duration FindMe will
route the call to the:
route the call to the:
on-busy devices if any current active location device was busy
on-no-answer devices if none of the current active location device were busy
on-no-answer devices if none of the current active location device were busy
Cisco VCS Deployment Guide: FindMe™ (Cisco VCS X5.1)
Page 20 of 24