Cisco Cisco TelePresence Video Communication Server Expressway
Set up FindMe
Set up FindMe
1. Ensure that the Cisco VCS has the FindMe option key installed (Maintenance > Option keys). If
it does not, contact your reseller to obtain a key.
2. Go to the FindMe configuration page (Applications > FindMe > Configuration).
3. Set
FindMe mode to On.
4. You are recommended to set Caller ID to FindMe ID.
FindMe ID: the caller ID of a call being made through this Cisco VCS is replaced with the
relevant FindMe ID.
Incoming ID: the caller ID is not altered; the caller ID presented to the called endpoint will be
the ID of the endpoint initiating the call.
Note: For more details on the use of Caller ID and FindMe ID, see “Appendix 8 – Determining the
FindMe ID for a caller” on page 22.
FindMe ID for a caller” on page 22.
5. Set up a Device creation message, such as “For Mobile and PSTN numbers, enter 9 followed by
the phone number of the device to call, e.g. 901344123456”.
This message is displayed when a user adds a new device and is useful for specifying, for
example:
This message is displayed when a user adds a new device and is useful for specifying, for
example:
how the Cisco VCS can route calls out of a gateway to the PSTN
the format of endpoint IDs
the format of endpoint IDs
Cisco VCS Deployment Guide: FindMe™ (Cisco VCS X5.1)
Page 4 of 24