Cisco Cisco VC220 Dome Network Camera 설치 가이드
12
VC 220 Dome WDR Day/Night PoE Network Camera Quick Start Guide
Suggested Next Steps
Adjusting the Lens
After viewing the live image on the web-based configuration utility, adjust
the camera lens, zoom factor, and focus range as needed.
the camera lens, zoom factor, and focus range as needed.
N
OTE
Do not over rotate the camera lens. Doing so will damage the lens.
To adjust the viewing angle:
S
TEP
1
Loosen the pan screw and turn the lens module left and right. Upon
completion, tighten the pan screw.
completion, tighten the pan screw.
S
TEP
2
Loosen the tilt screws on both sides of the camera and then turn
the lens module up and down to point the lens at the area of
interest. Upon completion, tighten the tilt screws.
the lens module up and down to point the lens at the area of
interest. Upon completion, tighten the tilt screws.
S
TEP
3
Loosen the image adjustment screw and then turn the lens to
adjust the image orientation. Upon completion, tighten the image
adjustment screw.
adjust the image orientation. Upon completion, tighten the image
adjustment screw.
S
TEP
4
Loosen the zoom controller to adjust the zoom factor from Wide to
Telephoto. Upon completion, tighten the zoom controller.
Telephoto. Upon completion, tighten the zoom controller.
7
Loosen
Tighten
Rotate the screw
Turn the lens
Turn the lens
1
3
Loosen
Tighten
2
Loosen
Tighten