Cisco Cisco Unified MeetingPlace for IBM Lotus Notes 관리 매뉴얼
92
Chapter 6 Troubleshooting
Cisco MeetingPlace for Notes System Manager’s Guide
OL-6008-01
2. Scroll down to the Sending Notifications area, and make sure
the Enabled for this Meeting parameter is set to Yes.
Third, check the mailbox and hard drive space of the
MeetingPlace for Notes gateway. If either is full, create more
space by deleting unwanted e-mails or files.
MeetingPlace for Notes gateway. If either is full, create more
space by deleting unwanted e-mails or files.
Fourth, check that the mailbox configurations for the Notes
Gateway and MeetingTime are set up consistently. Step-by-step
instructions can be found in the “Configuring for a Mixed
Groupware Environment” section on page 53:
Gateway and MeetingTime are set up consistently. Step-by-step
instructions can be found in the “Configuring for a Mixed
Groupware Environment” section on page 53:
1. Open the MeetingPlace Gateway Configurations Utility and
select the Notes Gateway tab. Check which mailbox the
Notes gateway points to referring to the MeetingPlace
Mailbox field.
Notes gateway points to referring to the MeetingPlace
Mailbox field.
2. Open MeetingTime and check which mailbox it uses to place
messages for MeetingPlace for Notes. This information can
be found in the Configure tab, Usage Parameters window.
be found in the Configure tab, Usage Parameters window.
3. Open MeetingTime and check what e-mail type the user is
using. This information can be found in the Configure tab,
User Profiles window.
User Profiles window.