Cisco Cisco VC220 Dome Network Camera 관리 매뉴얼
Connecting the Cisco VC 220 Camera
Connecting the Equipment
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
23
3
Connecting the Equipment
There are two options for deploying the Cisco VC 220 camera on the network: a
basic Ethernet setup or a Power over Ethernet (PoE) setup.
basic Ethernet setup or a Power over Ethernet (PoE) setup.
Basic Ethernet Setup
Follow these steps to perform a basic Ethernet setup.
STEP 1
Connect any external devices to the general I/O terminal block, if you have
sensors and alarms (1).
sensors and alarms (1).
STEP 2
Connect your Cisco VC 220 camera to a router or a switch using an Ethernet cable
(2).
(2).
STEP 3
Connect the supplied power adaptor (3) from your Cisco VC 220 camera to a
power outlet.
power outlet.
2
3
Router or Switch
1: Power
2: Digital output
3: Digital input
4: Ground
2: Digital output
3: Digital input
4: Ground
1