Cisco Cisco VC220 Dome Network Camera 관리 매뉴얼

Applications > Motion Detection

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

68

The Motion Detection page allows you to set motion detection parameters for the 
camera. When you complete the configuration, click Apply to save the settings.

Microsoft Internet Explorer (IE) is the official supported browser for the 
Cisco VC 220 IP camera. If another browser is used, you may not be able to 
successfully set values on the Motion Detection page.

•

Enable Motion Detection—Check this option to turn on motion detection.

•

Window 1/2/3 check boxes—Click to activate a new window. Up to three 
windows can exist simultaneously. Use the mouse to click, hold, and drag 
the window frame to resize or the title bar to move. Click the checkbox 
again to delete the window. 

•

Window Name—You can name the window. It’s suggested that you name it 
for the event being monitored.

There are two parameters for setting motion detection: Sensitivity and 
Percentage. After Sensitivity and Percentage are configured and saved, the 
Indicator bar shows how much motion triggers a response.

•

Sensitivity is a value that expresses the sensitivity to moving objects. 
Higher sensitivity settings are expected to sense a slight movement while 
smaller sensitivity settings tend to ignore the movement.

•

Percentage is a value that expresses the proportion of “alerted pixels” to all 
pixels in the motion detection window. For applications that require higher 
security management, higher sensitivity settings and lower percentage