Cisco Cisco VC220 Dome Network Camera 관리 매뉴얼

Administration > Time Settings

VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide

80

Use the Administration > Time Settings page to set your camera’s date, time, and 
time zone. When you complete the configuration, click Save to save the settings; 
otherwise click Cancel to discard the changes.

•

Camera Date/Time—Displays the current date and time. You can change 
the date or time by clicking on the Change button. A page appears that has 
parameters you can modify. The default time zone is Pacific Time. 

•

Time Zone—Set your time zone here.

•

Enable Daylight Saving Time—Select this option if your location is 
currently using daylight saving time. You must uncheck the box manually 
when daylight saving time ends in your time zone.

-

Enter the Start and End dates of Daylight Savings Time.

-

Enter the Daylight Savings Time bias. The default setting is 1 hour.

•

Check here if you want to update the time automatically through the 
NTP Server from the Internet—Enable or disable the NTP time server 
feature as required. If enabled, the camera contacts a network time server 
at regular intervals and update its internal timer. This field is disabled by 
default.

•

NTP Server Address—Enter the address of the NTP Server.

•

Default NTP server—Enter the Fully Qualified Domain Name of a 
recognized NTP server.

•

NTP Update Interval—Enter the interval the camera contacts a network 
time server. Choices are hourly, daily, weekly, or monthly.

Set the date and time when you first install the VC 220 camera or if you restore the 
camera’s default settings. We recommend that you change the time zone and 
daylight saving period first, and then set the date and time. Set the date and time 
by either syncing to a local PC, setting the date and time manually, or connecting to 
an NTP server.