Cisco Cisco VC220 Dome Network Camera 관리 매뉴얼
Configuring the Cisco VC 220 Network Camera Software
Administration > Maintenance
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
84
6
Administration > Maintenance
The Administration > Maintenance page gives options for Restart and Restore.
When you complete the configuration, click Save to save the settings; otherwise
click Cancel to discard the changes.
When you complete the configuration, click Save to save the settings; otherwise
click Cancel to discard the changes.
Restart
•
Restart—Resets the camera. Reset preserves your network settings.
Restore Defaults
•
Restore Defaults—Click to reset all settings to the factory defaults. During
the restoration process, you will receive a message that the device is
rebooting, and that your browser will reconnect to your camera’s IP
address. Restore Defaults preserves your network settings.
the restoration process, you will receive a message that the device is
rebooting, and that your browser will reconnect to your camera’s IP
address. Restore Defaults preserves your network settings.
Restore to Factory Default
•
Restore to Factory Defaults—Click to restore the factory default settings.
The system is reset to the initial factory settings and changes previously
made are lost.
The system is reset to the initial factory settings and changes previously
made are lost.
NOTE
Set the date and time if you restore the camera’s default settings. We recommend
that you change the time zone and daylight saving period first, and then set the date
and time. Set the date and time by either syncing to a local PC, setting the date and
time manually, or connecting to an NTP server.
that you change the time zone and daylight saving period first, and then set the date
and time. Set the date and time by either syncing to a local PC, setting the date and
time manually, or connecting to an NTP server.