Cisco Cisco VC220 Dome Network Camera 관리 매뉴얼
Finalizing the Cisco VC 220 Hardware Setup
Attaching the Dome Cover
VC 220 Dome WDR Day/Night PoE Network Camera Administration Guide
89
7
Attaching the Dome Cover
The supplied screwdriver is exclusively designed to match the dome screws. In
case you need to adjust the camera at a later time, do not discard the screwdriver.
case you need to adjust the camera at a later time, do not discard the screwdriver.
STEP 1
Route all the cables through the base channel under the camera.
TIP
Use the two L-shaped audio cables when you route the cables to prevent
having to remove a tab.
having to remove a tab.
STEP 2
(Optional) Remove the tab (or tabs) from the dome cover to accommodate the
cables. To avoid injury, place the pliers in the middle of the tab and pull outward.
cables. To avoid injury, place the pliers in the middle of the tab and pull outward.
STEP 3
Attach the dome cover to your Cisco VC 220 camera.
STEP 4
Secure the two dome screws with a screwdriver.
STEP 5
Ensure all parts of your Cisco VC 220 camera are securely installed
You are now ready to start using your Cisco VC 220 camera.
MAC: 002129727D24