Cisco Cisco Unified MeetingPlace Audio Server 관리 매뉴얼
Cisco MeetingServer 5.1 System Manager’s Guide
144
Cisco Systems
March 2003
7.
Select OK.
8.
Set the Overwrite Duplicate Information parameter to Yes.
9.
Set the error threshold. This value specifies the number of errors that
MeetingTime allows before aborting the import process. Do not set this
number too high, because large numbers of errors may be an indication
there is a problem with the import file itself.
MeetingTime allows before aborting the import process. Do not set this
number too high, because large numbers of errors may be an indication
there is a problem with the import file itself.
A status dialog box reports any error conditions that occur during the
import process.
import process.
10.
Click Execute to begin the import and update the existing user records.
To deactivate a group using the import process:
If you have a group or a list of groups you want to deactivate, you can
deactivate them automatically using the import process.
deactivate them automatically using the import process.
1.
Create an import file with two fields: Name (group name) and IsActive
(group active). Under these two fields, list the name(s) of the groups you
want to become deactivated followed by a comma and then “no”, as
shown below.
(group active). Under these two fields, list the name(s) of the groups you
want to become deactivated followed by a comma and then “no”, as
shown below.
Name,IsActive
Corporate,no
Sales,no
Corporate,no
Sales,no
2.
Open the Register Book, and select the System tab.
3.
From the left side of the tab, click Import Group Profiles.
4.
On the right side of the System tab, set the Action to Perform parameter
to Add Groups to System.
to Add Groups to System.