Cisco Cisco TelePresence Video Communication Server Expressway
Name
Standard SIP Profile – for phone devices
Use Fully Qualified Domain in SIP
Requests
Requests
Select the check box
Allow Presentation Sharing using
BFCP
BFCP
Select the check box if BFCP (Dual video / presentation sharing) is
required.
required.
4. Click Save.
Adding a phone device
1. Go to
Device > Phone
.
2. Click Add New.
3. Select a SIP Profile of Standard SIP Profile – for phone devices.
4. Configure the other fields as required.
5. Click Save and click OK.
6. Click Apply Config and click OK.
Alternatively, if there is already another phone configured, copy its configuration by selecting “super copy”,
entering the new phone’s MAC address and then changing the description (especially correct the MAC
address part of the description).
entering the new phone’s MAC address and then changing the description (especially correct the MAC
address part of the description).
Configuring the device directory number
1. Go to
Device > Phone
.
2. Select the relevant device name.
3. On the left hand side, select a line.
4. Set up the required directory number (for this example use a 3xxx number).
Configuring phone endpoint to pick up its configuration from Unified CM
Cisco phones
1. Press the settings button.
2. Select the Network Configuration section, and check whether the TFTP Server is the IP address of
Unified CM. If not:
a. Press the settings button twice – to return to SETTINGS menu.
b. Select Unlock and enter the appropriate password.
c. Select the Network Configuration section.
d. Set Alternate TFTP = YES.
e. Set TFTP Server = <IP address of Unified CM>.
b. Select Unlock and enter the appropriate password.
c. Select the Network Configuration section.
d. Set Alternate TFTP = YES.
e. Set TFTP Server = <IP address of Unified CM>.
f. Select Accept.
g. Select Save.
The phone should now indicate that Line 1 is the phone number specified on Unified CM (for example 3001).
EX60 / EX90 using TE6 software
Enter the relevant provisioning details:
Cisco Unified Communications Manager with Cisco VCS (SIP Trunk) Deployment Guide (X8.6)
Page 12 of 43
Enabling calls between endpoints registered on Unified CM