Cisco Cisco ASA for Nexus 1000V Series Switch 기술 매뉴얼
Contents
Introduction
Prerequisites
Requirements
Components Used
Configure
Network Diagram
Allow Inside Hosts Access to Outside Networks with PAT
Allow Inside Hosts Access to Outside Networks with NAT
Allow Untrusted Hosts Access to Hosts on Your Trusted Network
Static Identity NAT
Port Redirection (Forwarding) with Static
Verify
Connection
Syslog
Packet Tracer
Capture
Troubleshoot
Related Information
Introduction
This document explains how to configure Port Redirection (Forwarding) and the outside Network
Address Translation (NAT) features in Adaptive Security Appliance (ASA) Software Version 9.x,
with the use of the CLI or the Adaptive Security Device Manager (ASDM).
Address Translation (NAT) features in Adaptive Security Appliance (ASA) Software Version 9.x,
with the use of the CLI or the Adaptive Security Device Manager (ASDM).
Refer to the
Prerequisites
Requirements
Refer to
in order to allow the device to be configured by the
ASDM.
Components Used
The information in this document is based on these software and hardware versions:
Cisco ASA 5525 Series Security Appliance Software Version 9.x and later
●
ASDM Version 7.x and later
●
The information in this document was created from the devices in a specific lab environment. All of
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.
the devices used in this document started with a cleared (default) configuration. If your network is
live, make sure that you understand the potential impact of any command.