Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 관리 매뉴얼

WPS Setup

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

99

Configure the following additional settings:

•

No Acknowledgement—Select Enable to specify that the WAP device 
should not acknowledge frames with QosNoAck as the service class value.

•

Unscheduled Automatic Power Save Delivery—Select Enable to enable 
APSD, which is a power management method. APSD is recommended if 
VoIP phones access the network through the WAP device.

Click Save. The changes are saved to the Startup Configuration.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this happens, the WAP device may lose connectivity. We 
recommend that you change WAP device settings when a loss of connectivity will 
least affect your wireless clients. 

This section describes the Wi-Fi Protected Setup (WPS) protocol and its 
configuration on the WAP device. 

WPS is a standard that enables simple establishment of wireless networks 
without compromising network security. It relieves both the wireless client users 
and the WAP device administrators from having to know network names, keys, and 
various other cryptographic configuration options. 

WPS facilitates network setup by allowing the administrator to use a push button 
or PIN to establish wireless networks, which avoids the manual entry of network 
names (SSIDs) and wireless security parameters:

•

Push button: The WPS button is either on the product or a clickable button 
on the user interface.

•

Personal Identification Number (PIN): The PIN can be viewed in the 
product user interface.