Cisco Cisco WAP121 Wireless-N Access Point with Single Point Setup 관리 매뉴얼

Associated Clients

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE

19

Each network interface that is configured as a WorkGroup Bridge interface shows 
these fields:

•

Network Interface—Name of the Ethernet or VAP interface.

•

Status and Statistics—Whether the interface is disconnected or is 
administratively configured as up or down.

•

VLAN ID—Virtual LAN (VLAN) ID. You can use VLANs to establish multiple 
internal and guest networks on the same WAP device. The VLAN ID is set on 
the VAP tab.See 

.

•

Name (SSID)—Wireless network name. Also known as the SSID, this 
alphanumeric key uniquely identifies a wireless local area network. The 
SSID is set on the VAP tab. See 

Additional information appears for the transmit and receive direction for each 
WorkGroup Bridge interface:

•

Total Packets—The total number of packets bridged between the wired 
clients in the WorkGroup Bridge and the wireless network.

•

Total Bytes—The total number of bytes bridged between the wired clients 
in the WorkGroup Bridge and the wireless network.

You can click Refresh to refresh the screen and show the most current information.

You can use the Associated Clients page to view the client stations associated 
with a particular access point.

To show the Associated Clients page, select Status and Statistics > Associated 
Clients in the navigation pane.

The associated stations are shown along with information about packet traffic 
transmitted and received for each station.

•

Total Number of Associated Clients—The total number of clients currently 
associated with the WAP device.

•

Network Interface—The VAP the client is associated with. 

•

Station—The MAC address of the associated wireless client.