Cisco Cisco Aironet 350 Workgroup Bridges 릴리즈 노트

Workgroup bridges are small, standalone units that provide wireless infrastructure connections for 
Ethernet-enabled devices. A device connected to a bridge communicates with a network infrastructure 
through Cisco Aironet access points.

The bridge connects to a hub through a standard Ethernet port using a 10BASE-T/RJ-45 (twisted pair) 
connector, and up to eight client devices can be connected to the hub. You can use an Internet browser 
or Telnet to configure the bridge. 

The bridge communicates with Cisco Aironet access points, but it does not communicate with wireless 
networking devices manufactured by other companies.

Access points with which the bridge associates must contain firmware version 11.05 or later.

The firmware version number appears in the upper-left corner of most access point management 
screens in the browser interface and at the top of the home (Summary Status) page in the command-line 
interfaces.

For instructions on installing access point firmware:

Click on the following link to go to the Cisco Aironet documentation home page on CCO:

http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm

Follow this path to go to the product, document and chapter:
Aironet 350 Series Wireless LAN Products > Cisco Aironet 350 Series Access Points > Cisco 
Aironet Access Point Software Configuration Guide > Maintaining Firmware > Updating 
Firmware

To upgrade firmware from a file server, you must enter settings on the access point’s FTP Server 
Setup page. Consult the Cisco Aironet Access Point Software Configuration Guide for more 
information.