Cisco Cisco Email Security Appliance C170 설치 가이드
7
–
Router: 192.168.42.1
Step 7
Click OK.
8
Connect to the Appliance
The Cisco C390 appliances have five gigabit network ports and
a Management port, as shown in the figure on the following
page . At least one static IP address is required to send and
receive email.
a Management port, as shown in the figure on the following
page . At least one static IP address is required to send and
receive email.
You can receive and deliver email from a single connection to
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
Or, you can connect the Data 1 network port to your public
network and connect the Data 2 network port to your private
network.
network and connect the Data 2 network port to your private
network.
To access and manage the appliance by Ethernet, use the
Management network port. The IPv4 address that has been
assigned to the Management port by the factory is
192.168.42.42.
Management network port. The IPv4 address that has been
assigned to the Management port by the factory is
192.168.42.42.
For serial access to the appliance's console port, use the RJ-45
to DB-9 Rollover cable provided in the accessory kit to connect
the computer to the console port on the appliance.
to DB-9 Rollover cable provided in the accessory kit to connect
the computer to the console port on the appliance.
Item
Port
Description
1
Data 1
A Gigabit Ethernet customer data
interface.
interface.
2
Data 2
A Gigabit Ethernet customer data
interface.
interface.
3
Data 3
A Gigabit Ethernet customer data
interface.
interface.
C390_QSG.fm Page 7 Thursday, March 31, 2016 5:57 PM