Cisco Cisco UCS C260 M2 Rack Server 데이터 시트
Broadcom
The BCM57810S is a sixth-generation Converged
Controller designed for high-volume, converged LAN on
motherboard (LOM) and converged network adapter
applications, enables PCI SIG Single Root I/O
Virtualization (SR-IOV), iSCSI, FCoE, DCB, on-chip TOE,
and RDMA. The Converged Controller supports PCIe™
3.0 along with Embedded Virtual Bridging and other
switching technologies for high-performance direct
memory access (DMA) and virtual machine (VM) to VM
switching.
Controller designed for high-volume, converged LAN on
motherboard (LOM) and converged network adapter
applications, enables PCI SIG Single Root I/O
Virtualization (SR-IOV), iSCSI, FCoE, DCB, on-chip TOE,
and RDMA. The Converged Controller supports PCIe™
3.0 along with Embedded Virtual Bridging and other
switching technologies for high-performance direct
memory access (DMA) and virtual machine (VM) to VM
switching.
The BCM57810S includes dual-channel 10GBASE-KR and
SFF-8431 for SFP+ 10 Gb interfaces. The BCM57810S
integrates two IEEE 802.3™-compliant Media Access
Controllers (MAC) and supports the NC-SI. Host-BMC
communication is also supported on top of NC-SI to
permit high-speed communication between the local
host and the Baseboard Management Controller (BMC or
MC). The feature-complete Converged Controller
requires only 0.82 square inches of PCB space and
enables 10G speeds at low per port power.
SFF-8431 for SFP+ 10 Gb interfaces. The BCM57810S
integrates two IEEE 802.3™-compliant Media Access
Controllers (MAC) and supports the NC-SI. Host-BMC
communication is also supported on top of NC-SI to
permit high-speed communication between the local
host and the Baseboard Management Controller (BMC or
MC). The feature-complete Converged Controller
requires only 0.82 square inches of PCB space and
enables 10G speeds at low per port power.
The BCM57810S enables convergence of all the possible
network communications in a server, such as data
network (LAN), FCoE storage network, block, for
example, iSCSI, or file, for example, CIFS/NFS, clustering
or Interprocess Communications (IPC) by support of
RDMA over TCP. The BCM57810S can simultaneously
support all offload traffic types on each of the ports,
including simultaneous iSCSI and FCoE. Offload results in
superior storage and networking performance, and low
CPU utilization, resulting in significant system level
power savings.
network communications in a server, such as data
network (LAN), FCoE storage network, block, for
example, iSCSI, or file, for example, CIFS/NFS, clustering
or Interprocess Communications (IPC) by support of
RDMA over TCP. The BCM57810S can simultaneously
support all offload traffic types on each of the ports,
including simultaneous iSCSI and FCoE. Offload results in
superior storage and networking performance, and low
CPU utilization, resulting in significant system level
power savings.
The BCM57810S is designed for PCIe 3.0 and is also com-
patible with PCI Express® (PCIe) Base Specification Revi-
sions 2.0 and 1.1. The PCI Express supports MSI and MSI-
X capabilities. A separate PCI function is supported for
each of the ports.
patible with PCI Express® (PCIe) Base Specification Revi-
sions 2.0 and 1.1. The PCI Express supports MSI and MSI-
X capabilities. A separate PCI function is supported for
each of the ports.
Media Interfaces
•
Integrated dual 10 Gbps MAC with offload and dual
10GBASE-KR/SFF-8431 (SFP+)
10GBASE-KR/SFF-8431 (SFP+)
•
Single 25.00 MHz clock crystal for dual-port 10 Gbps
operation
operation
Host Interfaces
•
PCI Express x8 3.0, 8 GT/s-ready
•
PCI Express x8 2.0, 5 GT/s compliant
•
PCI Express x8 1.1, 2.5 GT/s compliant
•
PCI Express Lanes x1, x4, x8
•
No external DRAM required; flow-through architecture
•
PCI Express CLKREQ support
•
Single Root I/O Virtualization
•
Message Signal Interrupt (MSI/MSI-X) support
Network Interfaces
•
Dual-port 10GBASE-KR/SFF-8431 (SFP+) interfaces for
1 Gbps/10 Gbps operation
1 Gbps/10 Gbps operation
•
IEEE 802.3ap Clause 73-compliant backplane operation
•
IEEE 802.3xx Clause 37-compliant auto-negotiation for
1 Gbps
1 Gbps
TCP/IP Offload Engine (TOE)
•
Microsoft® TCP chimney compliant
•
Full FASTPATH® TCP offload for IPv4 and IPv6
Internet Small Computer Systems Interface (iSCSI) Control-
ler
ler
•
Offloaded full HBA functionality iSCSI initiator
•
iSCSI boot and iSCSI crash dump support
Fibre Channel over Ethernet (FCoE)
•
Receiver and transmitter CRC offload
•
Offloaded full HBA functionality FCoE initiator
RDMA Controller (R-NIC)
•
Hardware-based data placement in application buffers
without CPU intervention (for user and Kernel modes)
without CPU intervention (for user and Kernel modes)
•
Low latency
Robust Manageability
•
Network Controller Sideband Interface (NC-SI)
•
PXE v2.1 remote boot
•
Wake-on-LAN (WOL)
•
Statistics gathering (SNMP MIB II, Ethernet MIB) (IEEE
802.2x, Clause 30)
802.2x, Clause 30)
•
Comprehensive diagnostic and configuration software
suite
suite
Data Center Bridging (DCB)
•
Enhanced Transmission Selection (ETS) (IEEE 802.1Qaz)
•
Quantized Congestion Notification-Capable (QCN)
(IEEE 802.1Qau)
(IEEE 802.1Qau)
•
Priority Flow Control (PFC) (IEEE 802.1Qbb)
•
IEEE 802.1Qbg- and IEEE 802.1Qbh-capable for traffic
switching
switching
Overview
BCM57810S Features
10 Gbps DUAL-PORT iSCSI, FCoE, TOE, and RDMA PCI-SIG SR-IOV x8
PCI EXPRESS® 3.0-READY CONTROLLER
PCI EXPRESS® 3.0-READY CONTROLLER
B CM 5781 0S
NetXtreme II®
C o nve rged C o nt rol l er
NetXtreme II®
C o nve rged C o nt rol l er
Highlights
•
Low-power single-chip solution
for two ports of 10GBASE-KR
compliant backplane 10G Ether-
net
for two ports of 10GBASE-KR
compliant backplane 10G Ether-
net
•
Low-power single-chip solution
for two ports of SFP+ optical
converged network adapter
for two ports of SFP+ optical
converged network adapter
•
iSCSI v1.0 Host Bus Adapter
(HBA)
(HBA)
•
FCoE HBA applications
•
Applications with Energy Effi-
cient Ethernet™ for power sav-
ings with 10GBASE-T
cient Ethernet™ for power sav-
ings with 10GBASE-T
•
Virtualization environments
•
10GBASE-KR Mezzanine card for
server blades
server blades
•
10GBASE-T copper NIC with
Broadcom external 10G copper
PHY (e.g., BCM84833)
Broadcom external 10G copper
PHY (e.g., BCM84833)
Service
Provider
BCM57810S
Data Centers
Enterprise
Supported
Best Choice