Cisco Cisco Web Security Appliance S170 사용자 가이드

A physical port does not need an IP address configured in order to be in a VLAN. The physical port on 
which a VLAN is created can have an IP that will receive non-VLAN traffic, so you can have both VLAN 
and non-VLAN traffic on the same interface.

VLANs can only be created on the Management and P1 data ports.

You can create, edit and delete VLANs via the 

etherconfig

 command. Once created, a VLAN can be 

configured via the 

interfaceconfig

 command in the CLI. Remember to commit all changes.

In this example, two VLANs are created (named VLAN 31 and VLAN 34) on the P1 port:

Do not create VLANs on the T1 or T2 interfaces.

example.com> etherconfig

Choose the operation you want to perform:

- MEDIA - View and edit ethernet media settings.

- VLAN - View and configure VLANs.

- MTU - View and configure MTU.

[]> vlan

VLAN interfaces:

Choose the operation you want to perform:

- NEW - Create a new VLAN.

[]> new

VLAN ID for the interface (Ex: "34"):

[]> 34

Enter the name or number of the ethernet interface you wish bind to: