Cisco Cisco Web Security Appliance S170 사용자 가이드

Serial connection. Start a terminal session with the communication port on your personal computer 
that the serial cable is connected to.

Log in to the appliance by entering the username and password below.

Username: 

Password: 

For example: 

The top-level command prompt consists of the fully qualified hostname, followed by the greater than (

>

) 

symbol, followed by a space. For example:

When running commands, the CLI requires input from you. When the CLI is expecting input, the prompt 
displays the default values enclosed in square brackets (

[]

) followed by the greater than (

>

) symbol. 

When there is no default value, the brackets are empty. 

For example:

When there is a default setting, the setting is displayed within the command-prompt brackets. For 
example:

When a default setting is shown, typing Return is equivalent to accepting the default:

login: admin

password: ironport

example.com> 

example.com> routeconfig

Choose a routing table:

- MANAGEMENT - Routes for Management Traffic

- DATA - Routes for Data Traffic

[]>

example.com> setgateway

Warning: setting an incorrect default gateway may cause the current connection

to be interrupted when the changes are committed.

Enter new default gateway:

[172.xx.xx.xx]>