Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the VCS
Enable transcoders (Cisco AM GWs) for the B2BUA
1. Go to
Applications > B2BUA > Microsoft Lync > Configuration
.
2. Ensure that Enable transcoders for this B2BUA and Use transcoder policy rules in the
Transcoders
section have been enabled.
Specify the Cisco AM GWs
1. Go to
Applications > B2BUA > Transcoders
and click New.
2. Configure the fields as follows:
Address IP address or FQDN of the Cisco AM GW.
Port
IP port on the Cisco AM GW – typically 5061 (for TLS). This port should match the Encrypted SIP
(TLS) port configured on the
(TLS) port configured on the
Network > Services
page on the Cisco AM GW.
3. Click Create transcoder.
4. Repeat for all transcoders that the VCS will use (up to a total of 6 transcoders).
Cisco TelePresence Microsoft Lync 2010, Cisco VCS and Cisco AM GW Deployment Guide (X8.2)
Page 6 of 20
Configuring the VCS