Cisco Cisco TelePresence Video Communication Server Expressway
Configuring the Cluster Fully Qualified Domain Name
Unified CM must be configured with a Cluster Fully Qualified Domain Name so that it can receive calls to
addresses in the format <address>@domain. (It is also required when Unified CM is clustered so that VCS
can send the call to any Unified CM node.)
addresses in the format <address>@domain. (It is also required when Unified CM is clustered so that VCS
can send the call to any Unified CM node.)
1. Go to
System > Enterprise parameters
, and find the
Clusterwide Domain Configuration
section.
2. Set the Cluster Fully Qualified Domain Name to the same domain as the video network, for example
vcs.domain.
This parameter defines one or more Fully Qualified Domain Names (FQDNs) for this cluster. Multiple
FQDNs must be separated by a space. Requests containing URLs (for example, SIP calls) whose host
portion matches any of the FQDNs in this parameter will be recognized as a request destined for this
cluster and/or devices attached to it.
This parameter defines one or more Fully Qualified Domain Names (FQDNs) for this cluster. Multiple
FQDNs must be separated by a space. Requests containing URLs (for example, SIP calls) whose host
portion matches any of the FQDNs in this parameter will be recognized as a request destined for this
cluster and/or devices attached to it.
3. Click Save.
Unified CM with Cisco VCS (SIP Trunk) Deployment Guide (X8.1)
Page 19 of 46
Enabling endpoints registered on VCS to call endpoints registered on Unified CM