Cisco Cisco TelePresence Video Communication Server Expressway
n
H.323 ID (for example 4000@vcs.domain, 4001@vcs.domain and so on)
n
H.323 Call Setup = Gatekeeper
n
Gatekeeper IP address = IP address of the VCS
For SIP, configure the endpoints as follows:
n
SIP Address (URI) (for example 4000@vcs.domain, 4001@vcs.domain and so on)
n
Server Address (Proxy address) = IP address of the VCS
Confirming registrations
Registration status can be confirmed by checking the VCS via
Status > Registrations
.
By default the VCS will accept all H.323 registrations and all SIP registrations within the specified SIP
domain. You can limit registrations by explicitly allowing or denying individual registrations. See the “VCS
Configuration” section of VCS Administrator Guide for further details.
domain. You can limit registrations by explicitly allowing or denying individual registrations. See the “VCS
Configuration” section of VCS Administrator Guide for further details.
Test calls
Make some test calls.
Your call history can be seen on the VCS via
Status > Calls > History
.
Unified CM with Cisco VCS (SIP Trunk) Deployment Guide (X8.1)
Page 9 of 46
Enabling calls between endpoints registered on the VCS Control