Cisco Cisco TelePresence Video Communication Server Expressway
Endpoint configuration (with or without
TelePresence Conductor)
TelePresence Conductor)
Endpoints that can initiate a Multiway conference
Cisco IP Video Phone E20
n
E20 must be running TE1.0 or later code
n
E20 supports SIP Multiway only
To configure Multiway through the menu:
1. Go to
Menu > Advanced Settings > System Configuration > SIP > Profile 1 >
MultiWayConference
.
2. Configure the MultiWayConference setting:
l
If you are not using TelePresence Conductor, set MultiWayConference to the Conference Factory
Alias as set up on the VCS.
Alias as set up on the VCS.
l
If you are using TelePresence Conductor, set MultiWayConference to an alias matching the pattern
used on the search rule to route Multiway aliases to TelePresence Conductor
used on the search rule to route Multiway aliases to TelePresence Conductor
Cisco TelePresence System EX Series
n
EX60 and EX90 must be running TC4.2 or later code
n
Cisco TelePresence Touch for EX Series must be running TC4.2 or later code
To configure Multiway through a web browser:
1. Go to
Configuration > Advanced Configuration > Network Services > Multiway > Address
.
2. Configure the MultiWay Address setting:
l
If you are not using TelePresence Conductor, set MultiWay Address to the Conference Factory Alias
as set up on the VCS.
as set up on the VCS.
l
If you are using TelePresence Conductor, set MultiWay Address to an alias matching the pattern used
on the search rule to route Multiway aliases to TelePresence Conductor
on the search rule to route Multiway aliases to TelePresence Conductor
Cisco TelePresence System Profiles using C Series codecs
n
C20 must be running TC3.0 or later code
n
C40, C60 and C90 must be running TC4.0 or later code
n
Cisco TelePresence Touch for C Series codecs must be running TC4.2 or later code
To configure Multiway through a web browser:
1. Go to
Configuration > Advanced Configuration > Network Services > Multiway > Address
.
2. Configure the MultiWay Address setting:
l
If you are not using TelePresence Conductor, set MultiWay Address to the Conference Factory Alias
as set up on the VCS.
as set up on the VCS.
l
If you are using TelePresence Conductor, set MultiWay Address to an alias matching the pattern used
on the search rule to route Multiway aliases to TelePresence Conductor
on the search rule to route Multiway aliases to TelePresence Conductor
Cisco TelePresence Multiway™ Deployment Guide (X8.2, XC2.4)
Page 21 of 42
Endpoint configuration (with or without TelePresence Conductor)