Cisco Cisco TelePresence Video Communication Server Expressway
Configuring a search rule towards TelePresence Conductor:
For every VCS which is intended to route Multiway calls directly to TelePresence Conductor:
1. Log in to the VCS.
2. Go to
Configuration > Dial plan > Search rules
.
3. Click New.
4. Configure the search rule fields as follows:
Rule name
Multiway aliases to TelePresence Conductor
Priority
Enter a value appropriate to your dial plan. TelePresence Conductor search
rules should be high priority as the alias pattern chosen should not be relevant
to the other search rules.
rules should be high priority as the alias pattern chosen should not be relevant
to the other search rules.
Source
Any
Request must be
authenticated
authenticated
Configure this setting according to your authentication policy.
Mode
Alias pattern match
Pattern type
Regex
Pattern string
.*\.meet@cisco\.com
Pattern behavior
Leave
On successful match
Stop
Target
Conductor Neighbor Zone if using the TelePresence Conductor's B2BUA,
(Recommended deployment)
(Recommended deployment)
or
Conductor Policy Service if using the TelePresence Conductor as a policy
service.
service.
5. Click Create search rule.
Configuring a Multiway conference alias on the TelePresence
Conductor
Conductor
This section uses a single conference alias for all Multiway calls. For per user differentiation of Multiway
conferencing capabilities and properties it is necessary to define separate aliases and separate conference
templates.
conferencing capabilities and properties it is necessary to define separate aliases and separate conference
templates.
1. Log in to the TelePresence Conductor.
2. Go to
Conference configuration > Conference aliases
.
3. Click New.
4. Configure the fields as follows (keeping other values as the default):
Name
Multiway conferences
Incoming alias (must use regex)
(.*\.meet)@cisco\.com
Cisco TelePresence Multiway™ Deployment Guide (X8.2, XC2.3)
Page 9 of 36
Cisco Multiway with TelePresence Conductor