Cisco Cisco TelePresence Video Communication Server Expressway
Cisco Multiway with Conductor
Cisco VCS Deployment Guide: Multiway™ (Cisco VCS X7)
Page 9 of 35
Configuring the endpoints using TMS Provisioning
Extension
Extension
This part of the guide does not cover configuring TMS Provisioning Extension on the VCS and the
TMS. It assumes that the template schemas are already configured with enough information to create
a point to point call between two provisioned endpoints.
TMS. It assumes that the template schemas are already configured with enough information to create
a point to point call between two provisioned endpoints.
1. Log into the TMS as a user with administrator rights.
2. Navigate to the
Systems > Provisioning > Users
page through the drop down menu.
3. Click Configuration templates
4. Click on the template you want to edit.
5. Click Edit configurations
6. Configure the Multiway parameters for the endpoint as per the diagram below.
E20
SIP Profile MultiWayConference
Note: If using multiple SIP Profiles then the SIP Profile # MultiWayConference where
# is the profile number)
Note: If using multiple SIP Profiles then the SIP Profile # MultiWayConference where
# is the profile number)
EX series
NetworkServices MultiWay Address
{username}.meet@<SIP domain>
NetworkServices MultiWay Protocol
Configure as per your network, generally
Auto (the default) suffices.
Auto (the default) suffices.
MX200
NetworkServices MultiWay Address
{username}.meet@<SIP domain>
NetworkServices MultiWay Protocol
Configure as per your network, generally
Auto (the default) suffices.
Auto (the default) suffices.
Movi/ Cisco
TelePresence
Jabber
TelePresence
Jabber
Multiway Participant URI
{username}.meet@<SIP domain>
Configuring the endpoints manually for use with
Conductor
Conductor
To configure the endpoints manually for use with Conductor please refer to the section “Manual
Endpoint configuration with or without Conductor”
Endpoint configuration with or without Conductor”