Cisco Cisco TelePresence Video Communication Server Expressway
Cisco Multiway with TelePresence Conductor
Cisco TelePresence Multiway Deployment Guide (Cisco VCS X7.2 and Conductor XC2.2)
Page 7 of 41
licensed do not. Furthermore conferences cannot grow beyond the capability of the multisite endpoint hosting
the conference.
the conference.
Multiway makes use of video conferencing more intuitive and seamless. Multiway allows point to point calls
to be escalated to a multiparty conference and then allows further parties to be added to a call during the call
as and when required, rather than requiring individual parties to call into a pre-setup video conference.
to be escalated to a multiparty conference and then allows further parties to be added to a call during the call
as and when required, rather than requiring individual parties to call into a pre-setup video conference.
Prerequisites
This section describes how to configure the endpoints, the VCS, and TelePresence Conductor to use
Multiway.
Multiway.
It assumes that TelePresence Conductor, the VCS and the conference bridges have already been configured
and it is possible to dial directly into conferences using TelePresence Conductor. For details on doing this,
see the relevant
and it is possible to dial directly into conferences using TelePresence Conductor. For details on doing this,
see the relevant
(B2BUA or
Policy Service) depending on the deployment used. We recommend the deployment using the TelePresence
Conductor's B2BUA.
Conductor's B2BUA.
It is assumed that the VCS Control is running X7.2 code (or later) and has at least the following option keys
applied:
applied:
n
H323-SIP interworking
n
Non-traversal calls
The following software versions are required: