Cisco Cisco TelePresence Video Communication Server Expressway
Value: NtlmMinServerSec
Value Type: REG_DWORD - Number
Valid Range: same as NtlmMinClientSec
Default: 0
Description: This parameter specifies the minimum security to be used.
0x00000010 Message integrity
0x00000020 Message confidentiality
0x00080000 NTLMv2 session security
0x20000000 128 bit encryption
Checking domain information and VCS status
This appendix describes commands that can be used to check the status of the VCS’s connection to the AD
domain. In a clustered VCS system, each peer must be checked separately.
domain. In a clustered VCS system, each peer must be checked separately.
Domain_management
1. Login as root over SSH or via the serial interface.
2. Type:
domain_management
you will be presented with the options:
-----------------------------------
you will be presented with the options:
-----------------------------------
1) Join Domain
2) Leave Domain
3) VCS Status
4) Domain Information
5) Exit
-----------------------------------
3. Choose option 4) Domain Information.
The VCS will report:
LDAP server: <IP of AD server>
LDAP server name: <AD server name>
Realm: <AD DOMAIN (FQDN)>
Bind Path: dc= .. dc= … (representing <DOMAIN>)
LDAP port: <port, e.g. 389>
Server time: <Time>
KDC server: <IP of KDC server>
Server time offset: <offset between AD server and VCS>
Domain information request succeeded
4. Choose option 3) VCS Status.
5. When asked, enter the domain administrator username.
6. When asked, enter the domain administrator password (case sensitive).
The VCS will report:
… <lots of details> …
Domain status request succeeded
Device Authentication on Cisco VCS Deployment Guide (VCS X8.1)
Page 43 of 55
Appendix 3: Active Directory (direct)